Hello Folks;

I have stf and not come up with a specific answer to this q. If someone finds a thread please link it.
I'm going to start the CCNA RS track with my eye on taking the CCNA Voice afterwards. The one of the two CCNP.

I just pulled the trigger on 3 2801's routers w/ IOS 15.1 loaded. Will be grabbing 3 3550 switches to go with that.

My question is on the interface cards for the 2801's. According to cisco I need to grab HWIC cards and not the WIC ones. Is that correct?

I'm thinking I only need 2 and the appropriate x-over cable.

thnx